SANY QY25C, QY100, QY130, STC75, STC200, STC250 , STC500, STC1000, STC1300 truck crane parts.
Hydraulic oil filter 0800D010BN3HC 1259316 for Sany truck crane
Hydraulic oil filter 0800D010BN3HC 1259316 for Sany truck crane
This 0800D010BN3HC hydraulic oil filter (OEM reference 1259316) is a high-performance replacement element designed specifically for Sany truck crane hydraulic systems. It ensures clean oil circulation, protects sensitive valves and pumps, and extends service intervals under heavy-duty construction conditions.
| Parameter | Detail |
|---|---|
| Model | 0800D010BN3HC |
| OEM Part Number | 1259316 |
| Media Type | BN3HC – high-collapse, glass-fiber reinforced |
| Micron Rating | 10 μm (absolute) |
| Flow Rate | Up to 800 L/min (nominal) |
| Max Operating Pressure | 420 bar (6,090 psi) |
| Burst Pressure | ≥ 210 bar |
| Temperature Range | -25°C to +110°C |
| Fluid Compatibility | Mineral oils, synthetic hydraulic fluids, biodegradable oils |
| Replaces | Sany original 1259316, also cross-references with Pall, Donaldson, and Mahle equivalents |
1. High-Collapse BN3HC Media
The synthetic glass-fiber layer provides exceptional dirt-holding capacity while resisting pressure spikes common in crane boom and slewing circuits.
2. 10-Micron Absolute Filtration
Removes particles ≥10 μm with ≥99.9% efficiency, protecting servo-valves and piston pumps from abrasive wear.
3. Heavy-Duty End Caps & Center Tube
Steel-reinforced construction prevents bypass valve opening even at cold-start viscosity peaks.
4. Direct Drop-In Fit
Matches the original 1259316 dimensions – no adapter or modification required for Sany models.
Sany STC250
Sany STC500
Sany STC750
Sany SAC series (with compatible filter head)
Always verify your existing filter head and bypass valve setting before installation.
Replace this filter element every 1,000 operating hours or sooner if the built-in clogging indicator shows red. Always clean the filter housing and replace the O-ring (supplied separately) to ensure a leak-free seal.
| Feature | This Filter (0800D010BN3HC) | Generic Aftermarket |
|---|---|---|
| Media stability | High-collapse BN3HC | Often cellulose blend |
| Beta ratio | β10 ≥ 1000 | β10 ≥ 200 (typical) |
| Pressure fatigue tested | Yes (ISO 3724) | Not always |
| OEM fit guarantee | Yes (1259316 spec) | May vary |
Return line filter element – for Sany tank return circuits
Pilot filter cartridge – for control valve protection
Breather filter cap – to keep reservoir air clean
Clogging indicator – visual/electrical for maintenance alerts
Packaging: Individually sealed in anti-corrosion bag with labeled box
Lead time: Same-day dispatch (subject to stock)
Warranty: 12 months against manufacturing defects
Address:No. 1177, Tuanjie Road, Economic and Development Zone, Qingdao, China.
E-mail: Jack@toprunsparepart.com
Copyright © 2024 Qingdao Top Run International Trade Co.,Ltd. All Rights Reserved. Powered by HiCheng
Privacy Policy
SITEMAP
